Elevate Your Predator Generator with an Upgrade

Table of Contents

1. Introduction
2. The Need for a Wheel Kit
3. Options for Wheel Kits
4. AutoWorks Company Wheel Kit
5. Installation Process
6. Removing the Stock Wheels
7. Attaching the Axle Extenders
8. Installing the New Wheels
9. Dealing with the Brake Assembly
10. Final Thoughts

Introduction

The Predator 3500 inverter generator is a popular choice for power backup and outdoor activities. However, many users have found it difficult to move the generator, especially on surfaces other than concrete. This article will explore the need for a wheel kit for the Predator 3500 and discuss the installation process of the AutoWorks Company wheel kit.

The Need for a Wheel Kit

The stock wheels that come with the Predator 3500 are relatively small and not suitable for rough terrains like dirt or sand. Trying to move the generator on such surfaces can be a hassle. Therefore, investing in a wheel kit is essential to make the generator more portable and easy to maneuver.

Options for Wheel Kits

There are several options available in the market for wheel kits for the Predator 3500. These kits come with different types of wheels, such as solid non-flat wheels or pneumatic wheels. It is important to choose a kit that meets your requirements and provides durability and convenience.

AutoWorks Company Wheel Kit

One reputable company that offers a wheel kit specifically designed for the Predator 3500 is the AutoWorks Company. Their kit includes four solid non-flat wheels and axle extenders. The kit also provides a solution for retaining the wheel brake present on one of the stock wheels of the Predator 3500.

Installation Process

Installing the AutoWorks Company wheel kit is a straightforward process that can be done with basic tools. The following steps outline the installation process:

1. Removing the Stock Wheels: Use a straight edge screwdriver and needle-nose pliers to remove the cotter pins and washers securing the stock wheels. This will expose the axle for attaching the new wheels.

2. Attaching the Axle Extenders: Install the pre-drilled axle extenders provided in the wheel kit onto the original axles. Secure them in place using the set screws.

3. Installing the New Wheels: Slide the new wheels onto the axle extenders. Ensure they fit snugly and tighten the set screws to secure them in place.

4. Dealing with the Brake Assembly: If the kit includes a solution for retaining the wheel brake, follow the instructions provided by the AutoWorks Company. Ensure the brake assembly is properly aligned and engages with the designated pole.

5. Finalizing the Installation: Double-check all components and ensure they are securely fastened. Make any necessary adjustments to ensure smooth operation.

Final Thoughts

Investing in a wheel kit for your Predator 3500 inverter generator is a wise decision, especially if you frequently need to move it across different terrains. The AutoWorks Company wheel kit offers a reliable solution with durable wheels and axle extenders. By following the installation process outlined in this article, you can enhance the portability and convenience of your generator.

How to Upgrade the Wheels of Your Predator 3500 Inverter Generator

The Predator 3500 inverter generator from Harbor Freight is a popular choice among users for its reliability and versatility. However, one common issue faced by many is the difficulty of moving the generator on surfaces other than concrete. The stock wheels that come with the generator are small and not suitable for rough terrains like dirt or sand. Fortunately, there are aftermarket wheel kits available that can easily solve this problem.

The Need for a Wheel Kit

When it comes to portability, having a wheel kit for your Predator 3500 generator is essential. The small stock wheels provided with the generator might be sufficient for smooth surfaces, but they can quickly become a burden when you need to move the generator on uneven terrains. If you plan on using your generator for outdoor activities or in areas where a smooth concrete surface is not available, investing in a wheel kit is a wise decision.

Options for Wheel Kits

The market offers various options for wheel kits specifically designed for the Predator 3500 generator. These kits come with different types of wheels, such as solid non-flat wheels or pneumatic wheels. Both options have their pros and cons. Solid non-flat wheels are more durable and do not require maintenance, but they may not provide the same level of shock absorption as pneumatic wheels. On the other hand, pneumatic wheels offer better maneuverability on rough terrains but require occasional maintenance to ensure proper air pressure.

AutoWorks Company Wheel Kit

One popular and reliable option for a wheel kit for the Predator 3500 is the AutoWorks Company wheel kit. This kit includes four solid non-flat wheels and axle extenders. The wheels are made of high-quality materials and are designed to withstand various terrains. The axle extenders provided in the kit allow for easy installation and ensure a secure fit. Additionally, the kit offers a solution for retaining the brake assembly that comes with one of the stock wheels of the Predator 3500.

Installation Process

Installing the AutoWorks Company wheel kit is a simple process that can be done with basic tools. Here are the step-by-step instructions to upgrade the wheels of your Predator 3500 generator:

1. Removing the Stock Wheels: Start by removing the plastic cover that protects the stock wheels. Use a straight edge screwdriver and needle-nose pliers to remove the cotter pins and washers securing the wheels. This will expose the axle for attaching the new wheels.

2. Attaching the Axle Extenders: Take the pre-drilled axle extenders provided in the AutoWorks Company wheel kit and insert them onto the original axles. These axle extenders have set screw locations for easy installation. Make sure they are properly aligned and tighten the set screws to secure them in place.

3. Installing the New Wheels: Slide the new wheels onto the axle extenders. Ensure they fit snugly and tighten the set screws to hold them firmly in place.

4. Dealing with the Brake Assembly: If your AutoWorks Company wheel kit includes a solution for retaining the wheel brake, follow the instructions provided by the company. It may involve mounting a pre-machined piece that allows the brake assembly to work with the new wheels. Make sure the brake assembly is properly aligned and engages with the designated pole for efficient braking.

5. Finalizing the Installation: Double-check all the components and make sure they are securely fastened. Adjust any loose connections or misalignments to ensure smooth operation.

By following these simple steps, you can upgrade the wheels of your Predator 3500 inverter generator and greatly enhance its portability and maneuverability.

Final Thoughts

Investing in a wheel kit for your Predator 3500 generator is a smart choice for anyone who requires mobility and convenience. The AutoWorks Company wheel kit offers a reliable and durable solution with its solid non-flat wheels and axle extenders. With the upgraded wheels, you can easily move your generator on various terrains without any hassle. Make sure to carefully follow the installation instructions provided by the company to ensure a successful upgrade. Enjoy the freedom of effortlessly moving your Predator 3500 generator wherever you need it.