Get Started with an Easy Minecraft Cobblestone Generator

Table of Contents

1. Introduction
2. Required Materials
3. Building the Foundation
4. Connecting the Belt
5. Placing the Mechanical Drills
6. Adding the Chest and Funnel
7. Installing the Water Wheels
8. Increasing the Speed
9. Adjusting the Belt Direction
10. Waterlogging the Stairs
11. Installing the Lava
12. Finalizing the Generator
13. Customizing Your Generator
14. Conclusion

Article

Introduction

Welcome, fellow Minecrafters, to a quick tutorial on how to create a basic cobblestone generator for your Minecraft world. In this tutorial, we will assume that you are using the Create 3.0 mod. This compact and self-powering generator will allow you to easily gather cobblestone using early game materials. Let's dive in!

Required Materials

Before we get started, here's a list of the materials you'll need for this cobblestone generator:

• 1 large cog wheel
• 6 small cog wheels
• 2 water wheels
• 3 mechanical drills
• 1 belt
• 1 underside funnel
• 4 shafts
• 3 stairs (any material will do)
• 1 chest
• Building blocks (for the structure)
• Water source
• Lava bucket

Building the Foundation

To begin, create a row of four building blocks. Place shafts on the first and last blocks, then connect them with the belt. Right-click on the shaft to ensure it's properly connected. Next, add an extra shaft in the middle of the row. This will serve a specific purpose later on.

Connecting the Belt

Now, it's time to add the mechanical drills. Place three drills in a row next to the shafts. Wall them off on one side using additional blocks. Create a space for the chest and add an underside funnel connected to it. This is where the cobblestone will flow and collect.

Installing the Water Wheels

Move to the back of the generator and place two building blocks on either side of the row. Install the water wheels between these blocks, ensuring they align with the drills. For optimal power, make sure the water flows from the top, down the edge of the wheels, and back underneath them.

Increasing the Speed

To speed up the drills, remove them temporarily. Place a large cog wheel on the shaft connected to the water wheel. Then, add small cog wheels on top of the large one, doubling the speed. Repeat this process for each drill, increasing its speed and efficiency.

Adjusting the Belt Direction

If you notice that the belt isn't moving, it means the items won't flow into the chest. To fix this, go back to the extra shaft at the bottom. Replace it and ensure the belt's direction is correct, sweeping items towards the chest. Reattach the stairs to maintain structure.

Waterlogging the Stairs

Since water will be flowing above the drills, the three blocks behind them need to be waterlogged. Place a block to the side and add three stairs facing towards you, aligning them with the drills. Waterlog these stairs to create cobble behind them.

Installing the Lava

Seal off the top of the generator, directly above the belt and drills. Leave a three-block space and waterlog these blocks as well. To make it neater, place trapdoors over the waterlogged blocks. Finally, place a lava bucket in the center, allowing the lava to flow in each direction.

Finalizing the Generator

Now, observe as the drills break the cobblestone, which falls onto the belt. The cobblestone will flow into the underside funnel and collect in the chest. Your cobblestone generator is now fully operational and will continue producing cobblestone as long as it's running. To stop the process, simply remove one of the wheels.

Customizing Your Generator

Feel free to customize your generator to suit your preferences. You can decorate the structure, leave the cogs exposed at the back, or create a more intricate design. Let your imagination run wild and make it your own!

Conclusion

Congratulations! You've successfully created a basic cobblestone generator in Minecraft using the Create 3.0 mod. This generator provides a steady supply of cobblestone for all your building and crafting needs. Enjoy your newfound efficiency in gathering materials and have fun exploring the endless possibilities of Minecraft. Happy gaming!

Highlights

• Learn how to create a basic cobblestone generator in Minecraft
• Utilize the Create 3.0 mod for a more efficient and compact design
• Gather cobblestone using early game materials
• Self-powering generator with water wheels
• Increase the drilling speed to maximize production
• Adjust the belt direction to ensure items flow into the chest
• Customize your generator to suit your personal style
• Enjoy a steady supply of cobblestone for all your building needs

FAQ

Q: Can I use this cobblestone generator in vanilla Minecraft without mods? A: No, this tutorial assumes the use of the Create 3.0 mod, which enhances the gameplay and allows for the creation of more advanced structures and mechanisms.

Q: How many cobblestones can this generator produce per minute? A: The production rate depends on the speed of the drills and the efficiency of the water wheels. By increasing the speed, you can gather cobblestones at a faster rate.

Q: Can I expand this generator to produce other resources besides cobblestone? A: While this tutorial focuses on cobblestone generation, you can apply similar principles to create generators for other resources. Experiment with different setups to suit your needs.

Q: Can I automate the collection of cobblestone using hoppers and minecarts? A: Yes, you can incorporate hoppers and minecarts into your cobblestone generator to automate the collection process. This allows for a more hands-off approach and efficient gathering.

Q: Can I make the generator even more compact? A: The design presented in this tutorial is already quite compact. However, feel free to experiment and come up with your own variations to achieve a more compact design that suits your preferences.