Master an Efficient Satisfactory Coal Generator Setup!

Table of Contents

1. Introduction
2. Unlocking Coal Power
3. Setting Up the Platform
4. Placing the Coal Generators
5. Connecting the Water Extractors
6. Setting Up the Conveyor System
7. Connecting the Coal Belts
8. Setting Up the Pipe System
9. Distributing Water to Coal Generators
10. Setting Up Power Lines
11. Alternative Setup on Land
12. Overclocking Options
13. Conclusion

Introduction

In this article, we will discuss the process of setting up an efficient and basic coal generator power plant. We will provide step-by-step instructions and tips to ensure an effective setup. Whether you are a beginner or a veteran player, this guide will help you make the transition from manual biomass power to an automated coal generator setup.

Unlocking Coal Power

Before diving into the setup process, it is important to unlock coal power. This can be achieved by completing the first phase of the space elevator, which unlocks tiers three and four. Once these tiers are unlocked, you can proceed with the coal power milestone.

Setting Up the Platform

To begin the setup, a platform needs to be created. Start by making a five by twelve platform. If there is limited space on the water, the platform can be constructed on land, and we will discuss how to connect it later in this article.

Placing the Coal Generators

Once the platform is ready, it's time to place the coal generators. Start by placing the first coal generator at the left side, aligning it with the second foundation. Three coal generators should be placed for now, with the water extractor's pipe in the middle of the second and third coal generator.

Connecting the Water Extractors

Next, the water extractors need to be connected to the setup. Line up three water extractors and complete the row of coal generators with five more for a total of eight. This configuration will require a supply of 360 cubic meters of water per minute.

Setting Up the Conveyor System

To efficiently transport coal, conveyor lifts and splitters need to be set up. It is recommended to use mark two conveyor lifts, but mark one can also be used. Connect all the splitters with mark two belts, ensuring a smooth flow of coal between them.

Connecting the Coal Belts

Once the conveyor system is in place, it's time to connect the coal belts and let the coal flow into the generators. Ensure a continuous flow of coal by properly connecting the pipes between the coal generators.

Setting Up the Pipe System

To provide water to the generators, a pipe system needs to be set up. Begin by placing a pipe from the first coal generator and run it all the way down to the last generator. Use junction crosses to properly distribute the water flow across all the coal generators, eliminating the need for pumps.

Distributing Water to Coal Generators

With the pipe system in place, the water needs to be distributed to each coal generator. Use junction crosses at each generator's entrance to ensure even water supply.

Setting Up Power Lines

Now, it's time to set up power lines for both the water extractors and the coal generators. Start with the water extractors, allowing the pipes to fill before starting the coal generators. Once the pipes and coal line are full, proceed with the power lines for the coal generators.

Alternative Setup on Land

If space is limited on the water, an alternative setup can be done on land. In this setup, two pipes come into the platform, with each pipe going into four coal generators. Three water extractors are placed, with the middle one splitting its pipes into the other two. Pumps should be used if the pipes go higher than ten meters.

Overclocking Options

If overclocking is available, there are options to optimize the setup further. One option is to underclock four water extractors at 75%, allowing for two extractors per line. This reduces power consumption. Another option is to overclock two water extractors at 150%, requiring only one extractor per line but consuming more power.

Conclusion

By following these steps and tips, you can successfully set up a basic and efficient coal generator power plant. This transition will provide a significant power boost, allowing for more advanced automation and resource utilization.

FAQ

Q: Can I use mark one conveyor lifts instead of mark two? A: Yes, mark one conveyor lifts can be used without affecting the setup.

Q: How can I unlock coal power? A: Coal power can be unlocked by completing the first phase of the space elevator and the coal power milestone.

Q: Can the setup be done on land instead of water? A: Yes, an alternative setup for land is provided in this article.

Q: What is the benefit of overclocking the water extractors? A: Overclocking the water extractors allows for more efficient water distribution but comes with increased power consumption.

Q: How much power can the setup generate? A: The setup can provide a total of 600 megawatts of power.