Master the Art of Cutting Circles with Milescraft CircleGuideKit

Table of Contents

1. Introduction
2. Overview of the Miles Craft Circle Guide
3. Components of the Circle Guide Kit
   1. Circle Guide Head
   2. Offset Base
   3. Aluminum Beam
   4. Small Circle Jig
   5. Large Circle Slide
4. Setting Up the Circle Guide Kit
   1. Attaching the Turn Lock Base Plate to the Router
   2. Assembling the Large Circle Cutter
   3. Assembling the Small Circle Cutter
5. Cutting Large Circles
   1. Marking and Preparing the Circle
   2. Positioning the Router Bit
   3. Making the Cuts
6. Cutting Small Circles
   1. Marking and Preparing the Circle
   2. Positioning the Router Bit
   3. Making the Cuts
7. Tips for Achieving Accurate Results
8. Pros and Cons of the Miles Craft Circle Guide
9. Conclusion

Overview of the Miles Craft Circle Guide

The Miles Craft Circle Guide is a versatile tool that allows you to easily cut both small and large circles of various diameters. With this guide, you can create perfect circles ranging from 1 and 1/2 inches to 52 inches in diameter. Whether you're working on a DIY project or a professional woodworking task, the Miles Craft Circle Guide gives you the precision and accuracy you need.

Components of the Circle Guide Kit

The Miles Craft Circle Guide kit comes with several essential components to help you cut circles with ease. These include the Circle Guide Head, Offset Base, Aluminum Beam, Small Circle Jig, Large Circle Slide, and various other accessories such as drill bits and mounting screws.

Circle Guide Head

The Circle Guide Head is the main component that holds the various accessories in place. It has a track where the Aluminum Beam, Small Circle Jig, and Large Circle Slide can be attached securely. The Circle Guide Head allows you to adjust the position and diameter of the circle you want to cut.

Offset Base

The Offset Base is an essential component that provides maximum support when finishing the edges of your circles. It attaches to your router and ensures stability and accuracy during the routing process.

Aluminum Beam

The Aluminum Beam is used to extend the reach of the Circle Guide and provides stability when cutting larger circles. It attaches to the Circle Guide Head and can be adjusted according to the desired diameter.

Small Circle Jig

The Small Circle Jig is used for cutting circles with diameters ranging from 1 and 1/2 inches to 12 inches. It is attached to the Circle Guide Head and allows you to make precise cuts for smaller circles.

Large Circle Slide

The Large Circle Slide is used for cutting circles with diameters ranging from 10 inches to 52 inches. It is attached to the Aluminum Beam and provides a smooth sliding motion for making accurate cuts.

Setting Up the Circle Guide Kit

Before you can start cutting circles with the Miles Craft Circle Guide, you need to set up the kit properly. Here are the steps to follow:

Attaching the Turn Lock Base Plate to the Router

To begin, remove the baseplate from your router and insert the appropriate end of the centering pin into the router's collet according to the manufacturer's instructions. Then, attach the turn lock bushing into the base plate by twisting it into the opening in the center. Lower the base plate over the centering pin and rotate it until the correct mounting slots line up with the base mounting screw holes. Securely attach the turn lock base plate to your router using the mounting screws.

Assembling the Large Circle Cutter

To assemble the large circle cutter, attach the Aluminum Beam to the Circle Guide Head, ensuring that the end with the smallest measurement is inserted properly. Make sure the beam is fully inserted into the track of the Circle Guide Head and tighten the knob. Then, attach the Large Circle Slide to the other end of the beam, ensuring it is inserted correctly underneath the beam.

Assembling the Small Circle Cutter

To assemble the small circle cutter, attach the Small Circle Jig to the Circle Guide Head, making sure the jig is fully inserted into the track and the flange bolt is in place. Securely tighten the knob on the Circle Guide Head.

Cutting Large Circles

Cutting large circles with the Miles Craft Circle Guide is a straightforward process. Here's how to do it:

1. Mark the center point of your circle and then mark at least one point on the circle diameter.
2. Use the provided drill bit to pre-drill a hole for the pivot screw on your center point.
3. Screw the center pivot on the small circle jig tightly with the pivot screw.
4. Place the Large Circle Slide onto the center pivot and push down gently to ensure it's fully engaged.
5. Insert the provided quarter-inch straight bit into your router's collet and secure it following the router's manufacturer instructions.
6. Line up all three arrows on the turn lock baseplate with the arrows on the Circle Guide Head.
7. Drop the baseplate in at the desired position and turn it clockwise until it locks into place.
8. Make one complete pass on your circle before adjusting the depth. Each pass should be a quarter inch to 5/16 of an inch deep until your desired depth is reached.

Cutting Small Circles

To cut small circles with the Miles Craft Circle Guide, follow these steps:

1. Mark the center point of your circle and mark at least one point on the circle diameter.
2. Use the provided drill bit to pre-drill a hole for the pivot screw on your center point using the center pivot hole on the small circle jig.
3. Screw the small circle jig to your workpiece securely.
4. Insert the provided quarter-inch straight bit into your router's collet and secure it as directed by the routers manufacturer.
5. Follow the same steps for adjusting the turn lock baseplate as mentioned earlier.
6. Make one complete pass on your circle before adjusting the depth. Each pass should be a quarter inch to 5/16 of an inch deep until your desired depth is reached.

Tips for Achieving Accurate Results

• Always double-check your measurements and markings before making any cuts.
• Keep a firm grip on your router throughout the cutting process.
• Ensure that the turn lock baseplate is properly attached and locked into place.
• Take your time and make multiple passes for deeper cuts, rather than trying to cut too deep in a single pass.
• Use a consistent and steady motion when guiding the router along the circle guide.
• Make sure your workspace is well-lit, and use clamps or other tools to secure your workpiece for added stability.

Pros and Cons of the Miles Craft Circle Guide

Pros:

• Versatile tool for cutting circles of various diameters
• Easy to assemble and use
• Provides precise and accurate results
• Can be used for both small and large circle cuts
• Durable and high-quality construction

Cons:

• May require additional adjustments and modifications for certain router models
• Slightly more expensive compared to other circle cutting tools on the market

Conclusion

The Miles Craft Circle Guide is a valuable tool for anyone needing precision and accuracy when cutting circles. With its easy setup and versatile design, this tool allows you to create perfect circles of various diameters, whether for woodworking projects, DIY crafts, or professional applications. Follow the instructions provided in this guide to set up the circle guide kit and achieve accurate results in your circle cutting endeavors.