Maximize Power Production with a Efficient Coal Setup

Table of Contents

1. Introduction
2. Building the Ramps and Platform
3. Placing the Coal Generators
4. Extending towards the Water Source
5. Installing Water Extractors
6. Connecting the Pipes
7. Setting up Pipeline Junction Crosses
8. Installing the Pipeline Pump
9. Connecting the Generators with Conveyor Splitters
10. Connecting the Conveyor Belts
11. Connecting the Power Grid
12. Filling with Water and Coal
13. Connecting the Coal Generators to the Power Grid
14. Conclusion

Introduction

In this tutorial, we will walk you through the steps to build a starter cool setup in Satisfactory. This setup is designed to produce around 600 megawatts of power and is perfect for beginners. Before starting the build, make sure you have a conveyor mark II with 120 coal per minute and a nearby water source. Let's get started!

Building the Ramps and Platform

To begin, place a couple of ramps and a 5x7 platform on top of them. This will serve as the foundation for the rest of the setup. Take your time to ensure the placement is correct.

Placing the Coal Generators

Next, it's time to place the coal generators. Align them on the edge of the platform, with four generators on each side. This will ensure optimal spacing and efficiency. Take care to align them perfectly.

Extending towards the Water Source

Now, extend the platform towards the water source by adding four foundations in that direction. These foundations will serve as the base for the water extractors.

Installing Water Extractors

Place four water extractors, two on each side, facing the platform. Ensure they are in line with the platform and adjust their clock speed to 75 to avoid excessive power consumption.

Connecting the Pipes

Using the vertical build mode, connect the water extractors to the platform with pipes. Make sure each water extractor has its own separate pipe. Install pipeline junction crosses to connect the pipes properly.

Setting up Pipeline Junction Crosses

Place pipeline junction crosses in front of all the fluid ports on the coal generators. This will ensure proper distribution of fluids throughout the setup. Connect the pipes to the junction crosses, ensuring they are separate and not connected to each other.

Installing the Pipeline Pump

Install a pipeline pump mark one on each pipe, facing upward. These pumps will maintain the flow of water within the setup. Ensure they are evenly distributed and aligned properly.

Connecting the Generators with Conveyor Splitters

Place conveyor splitters between two coal generators, making sure they are positioned in the middle. Connect each splitter to the respective generators using conveyor belt mark 2.

Connecting the Conveyor Belts

Connect the conveyor belts to the conveyor splitters, ensuring a continuous flow of coal to the generators. Even though it may appear wiggly, it will work effectively.

Connecting the Power Grid

Place power poles in front of each coal generator, then build a square of power poles nearby. Connect the power poles to the main power grid using power lines.

Filling with Water and Coal

Fill all the water extractors with water and wait for the coal generators to fill up with coal. Ensure each coal generator has enough water and coal for operation.

Connecting the Coal Generators to the Power Grid

Finally, connect each set of coal generators to the power poles using power lines. Smoke should start coming out of the generators, indicating they are receiving enough water and coal. The setup is now fully self-sufficient and capable of producing 600 megawatts of power.

Conclusion

Congratulations on successfully building a starter cool setup in Satisfactory! This setup will provide you with a reliable source of power and can be connected to your main power grid. Enjoy the benefits of a well-organized and efficient power generation system.

Article Title: How to Build a Starter Cool Setup in Satisfactory: A Step-by-Step Guide

Introduction

Are you new to Satisfactory and looking to build a starter cool setup that can produce a significant amount of power? Look no further! In this guide, we will walk you through the process of building a setup that can generate around 600 megawatts of power. This setup is perfect for beginners and is relatively easy to build. Before we dive into the details, we would like to highlight the importance of having a conveyor mark II with 120 coal per minute and access to a nearby water source. With these prerequisites in place, let's get started!

Building the Ramps and Platform

The first step in building the starter cool setup is to lay the foundation. Start by placing a couple of ramps and a 5x7 platform on top of them. This will provide a stable base for the rest of the setup. Take your time to ensure the placement is correct and the platform is level.

Placing the Coal Generators

Once the foundation is ready, it's time to place the coal generators. Align them on the edge of the platform, with four generators on each side. This layout allows for optimal spacing and ensures efficient power generation. Pay close attention to the alignment to avoid any inconsistencies.

Extending towards the Water Source

Next, extend the platform towards the water source. Add four more foundations in that direction to create a path for the water extractors. This extension will ensure easy access to the water source and facilitate the proper functioning of the setup.

Installing Water Extractors

Now it's time to install the water extractors. Place four water extractors, two on each side of the platform, facing the platform. Ensure they are in line with the platform to maintain symmetry. Don't forget to adjust the clock speed of the water extractors to 75, as this will prevent excessive power consumption.

Connecting the Pipes

To establish the water supply, connect the water extractors to the platform using pipes. Switch to the vertical build mode and connect each water extractor to its designated spot on the platform. It is crucial to ensure that each water extractor has its own separate pipe to avoid mixing fluids.

Setting up Pipeline Junction Crosses

To maintain a steady flow of water within the setup, place pipeline junction crosses in front of all the fluid ports on the coal generators. These junction crosses will ensure proper distribution of water throughout the setup. Connect the pipes to the junction crosses, keeping them separate and not connected to each other.

Installing the Pipeline Pump

To enhance the flow of water, install a pipeline pump mark one on each pipe segment. Make sure these pumps are evenly distributed and facing upward. The pumps will keep the water flowing smoothly through the pipes, avoiding any potential bottlenecks.

Connecting the Generators with Conveyor Splitters

To supply coal to the generators, place conveyor splitters between every two coal generators. The splitters should be positioned in the middle, ensuring an equal distribution of coal. Connect each splitter to the respective generators using conveyor belt mark 2.

Connecting the Conveyor Belts

Once the splitters are in place, connect the conveyor belts to the splitters. This will establish a continuous flow of coal to the generators. Keep in mind that the conveyor belts may appear wiggly due to the positioning of the splitters, but this is normal and will not affect the setup's functionality.

Connecting the Power Grid

To connect the setup to the power grid, place power poles in front of each coal generator. Then, build a square of power poles nearby to act as a power grid connection point. Connect the power poles to the main power grid using power lines. This step is crucial to ensure a stable and reliable power supply.

Filling with Water and Coal

Before powering up the generators, it's essential to fill them with water and coal. Make sure each water extractor has enough water, and each coal generator is adequately filled with coal. This step will guarantee uninterrupted power generation once the setup is operational.

Connecting the Coal Generators to the Power Grid

Finally, connect each set of coal generators to the power poles using power lines. Once connected, you should see smoke coming out of the generators, indicating they are receiving enough water and coal. At this point, the setup is fully self-sufficient and capable of producing 600 megawatts of power.

Conclusion

Congratulations! You have successfully built a starter cool setup in Satisfactory. With this setup in place, you can enjoy a steady and reliable source of power. Feel free to connect this setup to your main power grid or expand it further to meet your growing power needs. Remember to regularly check and refill the water and coal supply to ensure uninterrupted power generation. We hope this guide has been helpful, and we wish you all the best in your Satisfactory journey!