Upgrade Your Harbor Freight Predator 3500 Generator with Remote Start!

Upgrade Your Harbor Freight Predator 3500 Generator with Remote Start!

Table of Contents:

1. Introduction
2. Choosing the Remote Start for the Predator 3500
3. The Installation Process
4. Removing the Grommets and Screws
5. Popping off the Wheels
6. Removing the Front Panel
7. Installing the Module and Wires
8. Locating and Connecting the Black and White Wires
9. Accessing the Stop Connection
10. Running Wires and Installing the Kill Switch
11. Putting Everything Back Together
12. Conclusion

Article: How to Install a Remote Start for the Harbor Freight Predator 3500 Generator

Introduction

If you own a Harbor Freight Predator 3500 generator and want to add the convenience of a remote start, you're in luck. In this article, we will guide you through the step-by-step process of installing a remote start for the Predator 3500. This upgrade will make your off-grid experience even more convenient and hassle-free. So let's dive in and learn how to install the remote start on this popular generator.

1. Choosing the Remote Start for the Predator 3500

Before diving into the installation process, it's crucial to choose the right remote start for your Predator 3500. As the generator is continuously being upgraded, it's essential to determine which version you have. For this installation, we are using version 2.0 from Generator Upgrade Supply. Make sure to double-check which version you own to ensure compatibility with the remote start module.

2. The Installation Process

Now that you have the compatible remote start, it's time to begin the installation process. We will walk you through each step, ensuring a smooth and successful setup.

3. Removing the Grommets and Screws

To start with, you need to remove the two grommets and screws on the generator. This step allows you to access the necessary components for the remote start installation. By removing these grommets and screws, you can proceed to the next stages of the process with ease.

4. Popping off the Wheels

Next, you need to remove the wheels to create space for the remote start module. Begin by removing the front wheels using the provided instructions. This step will ensure a seamless installation process and make room for the remote start components.

5. Removing the Front Panel

To access the inner components of the Predator 3500, you will need to remove the front panel. There are two screws located at the top that need to be taken out. Once removed, the front panel can be popped out, providing access to the necessary wiring and connections for the remote start module.

6. Installing the Module and Wires

Now comes the crucial step of installing the remote start module and connecting the wires. Start by peeling off the Velcro sticky on the back of the module. Next, locate the black and white wires with the male and female spade connectors. These wires need to be connected to the start switch on the front panel.

7. Locating and Connecting the Black and White Wires

On the front panel, you will find the start switch in the upper right corner. Locate this switch and disconnect the black and white wires. Then, connect the black and white wires from the module to the respective black and white wires on the panel. This connection is vital to ensure the proper functioning of the remote start.

8. Accessing the Stop Connection

To access the stop connection, you will need to take off the entire front assembly of the generator. Unfortunately, the instructions, and even the video, do not provide clear information on how to do this. It requires some trial and error, but by removing the front screws and carefully pulling apart the front assembly, you will be able to access the necessary connections.

9. Running Wires and Installing the Kill Switch

Now that you have access to the stop connection, you can run the wires through the generator. Connect the green, yellow, and red wires from the module to the corresponding connections behind the front assembly. Additionally, the kit comes with a kill switch, which can be installed in place of the 12-volt relay hole. This will enable you to turn off the module when the generator is not in use.

10. Putting Everything Back Together

Once all the connections and wiring are in place, it's time to put everything back together. Reassemble the front assembly, ensuring all the screws are tightly secured. Make sure to reconnect the battery and double-check all the connections for accuracy. This step is crucial to ensure the proper functioning of the remote start.

11. Conclusion

Congratulations! You have successfully installed the remote start for your Harbor Freight Predator 3500 generator. This upgrade will undoubtedly enhance your off-grid experience, providing convenience and ease of use. Remember, if you encountered any difficulties during the installation process, reach out to Generator Upgrade Supply for assistance. Enjoy the benefits of remote starting your generator and embrace a more convenient off-grid lifestyle.

Highlights:

• Upgrade your Harbor Freight Predator 3500 generator with a remote start
• Choose the compatible remote start version for your generator
• Step-by-step instructions for successful installation
• Remove grommets, wheels, and front panel for access
• Install the module and connect the wires accurately
• Access the stop connection by removing the front assembly
• Run wires and install the kill switch for additional functionality
• Put everything back together and ensure proper functioning
• Enjoy a convenient and hassle-free off-grid experience

FAQ:

Q: Can I install a remote start on other generator models? A: The installation process may vary depending on the generator model. It's crucial to follow the specific instructions for your generator to ensure a successful installation.

Q: Where can I purchase the remote start for my Predator 3500 generator? A: You can purchase the remote start module from Generator Upgrade Supply. Visit their website for more information and to order the compatible version for your generator.

Q: Will the remote start drain the generator's battery? A: The remote start module is designed to minimize power consumption when not in use. Additionally, the included kill switch allows you to turn off the module completely when the generator is not in use, preventing any unwanted battery drainage.

Q: Can I revert back to the original setup if needed? A: Yes, if you ever need to return your generator to its original configuration, you can simply follow the reverse steps of the installation process. Make sure to keep all the original components and screws for easy reassembly.